Century Arms L1a1 Serial Numbers

Cai Imbel L1a1 Sporter Serial Number ->>->>->> DOWNLOAD 1 / 5. Owner’s Manual FAL SEMI-AUTO SPORTER RIFLE Cal.308 WIN. READ ALL INSTRUCTIONS AND WARNINGS IN THIS BOOKLET BEFORE USING THIS FIREARM. If there is any aspect of the owner’s manual or how to safely operate the firearm that you do not understand, contact Century International Arms, Inc.

NOTE: This product review was made possible by GunsForSale.com. To get up-to-date information on where to find Century rifles for sale, please visit. The Century Arms G-1 is a copy of the Fn-Fal that uses surplus parts from metric versions as well as American made parts to comply with US gun laws. Century makes two types of the G-1. The only difference between the two is the buttstock. This particular example has the M-249 type stock.

The stock is heavier than the standard and has a foldup wire shoulder support. This wire support was not used in this review. The T-48 used in competition against the M-14 Another hurdle was which countries would adopt this main battle rifle. The most heated competition was in the US where the Fal was pitted against the T-44 that was later officially named the M-14. Of course we all know what happened the M-14 won and was adopted by the United States military. After the Korean War they adopted the M-14 as did various other countries.

By a wide margin the Fal won out with 90 nations adopting it for military service. Even into the 21st century smaller nations still use the Fal.

In fact if you keep track of world events you’ll see Libyan rebels using the Fal as the primary weapon in the fight against Khadafi. The Fn-Fal was so widely used by western nations it was called “The right arm of the free world”. Now some may be wondering why the British named their version the L1A1 while others used Fn-Fal. The answer is pretty simple the British used the inch system of measure while European countries used metric measurement.

There really is very little difference between the two rifles. One important fact to note is the inch version can use metric magazines as well while the metric rifle can only use metric magazines. I would discourage using metric mags in a British model since they tend to be rather loose fitting.

The Century G-1 model is a metric version. All of the controls and internals operate in the same manner as the inch models. The gas system can be regulated by rotating the ring, that is located just behind the front sight. This is a handy arrangement. When other rifles are very dirty or become fouled with sand, mud etc.

They have to be cleaned to stay in the fight. With the G-1 you simply adjust the gas system to allow higher gas pressure in the system that allows it to continue working in adverse conditions. With the gas system off rifle grenades can be used. The standard gas setting is set on the number three. The adjustment ring goes from 1 through 9. The front sight is adjustable for elevation only.

Once set it needs no further adjustment. The rear sight is adjustable for Windage and elevation. When sighting in the rifle the first time the rear sight should be set at 200 meters.

The front post is then adjusted until zero is achieved at 100 meters. The rear sight slides on a ramp with markings to indicate 100/200 through 600 meters. A small spring loaded plug in depressed allowing the shooter to move the rear sight forward and to the rear.

To adjust Windage the rear sight moves on a track. There is one screw on the left and one on the right. The user loosens one screw and tightens the one on the opposite side to make windage adjustments. The left side windage screw is just under the spring plunger in this picture.

This Century model featured in these pictures is the metric with an M-249 buttstock. In the above picture shown just under the windage adjustment is the takedown lever. When the user pulls it back the rifle breaks open. Remove the receiver cover by sliding it to the rear. The bolt assembly can then be pulled straight back and out of the receiver.

Then clean the bolt and carrier as usual. This also gives access to the barrel for cleaning.

One thing Century did was to attach an American made flash suppressor rather than the original long suppressor. This is much more effective at reducing recoil and flash. The thumb safety is standard for most military rifles these days.

It’s located on the left side just under the shooters left thumb. Up is safe down is fire. Specifications Country of origin Belgium Weight 11 lbs (with laoded 20 round magazine), 9.5 lbs (without magazine) Action tilting breechlock/regulated gas system Length 42″ Barrel 21″ Twist 4 groove, RH, 1:12″ Cyclic rate 650 rpm (full auto, military FN FAL) Muzzle velocity (21″ FAL with SS 77 rounds): 2754 fps The Century G-1 has a carry handle above the ejection port as well as a steel bi-pod which is standard on the heavy barrel versions. The bi-pod also rotates to the left and right allowing adjustment on uneven surfaces.